-
Junior Member
Reputation: 10
Sepura SRG3900 GPS LIP On PEI Help
Hello friends, I need to configure my srg3900 ad GPS LIP destination for other sepura radios, What I should set in RM to accomplish that ? Once I have routed the messages on the PEI one what set of AT commands I have to use the see the gps locations sent by the other radios to the srg3900 ?
A full set of AT commands for this radio will be very much appreciated.
Thanks a lot to everyone will join
-
2022-06-13 07:59 PM
# ADS
Circuit advertisement
-
Member
Reputation: 211
Re: Sepura SRG3900 GPS LIP On PEI Help
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 10
Re: Sepura SRG3900 GPS LIP On PEI Help
Hello,
so from what I read I have to use the "AT+CTSP=2,3,10" in order to properly route the data on the PEI port but I did not understand what will happen after, every GPS LIP report will be printed on the serial port automatically ? Or I have to ask the radio to print those report ,each 20 seconds fo example, with another AT command ?
Thanks a lot for your help !
Bookmarks