Table of Contents
1. Call setup performance. 4
1.1 Idle Mode Performance. 4
1.1.1 Parameters. 5
1.1.2 Testing Scenarios. 6
1.1.3 Tools & Test Procedure. 7
1.1.4 Example Results. 7
1.1.5 Conclusions for this network. 10
1.2 RRC Connection Establishment Performance. 12
1.2.1 Parameters. 13
1.2.2 Testing Scenarios. 15
1.2.3 Tools & Test Procedure. 16
1.2.4 Example Results. 16
1.3 RAB Establishment Performance. 20
1.3.1 Parameters. 20
1.3.2 Testing Scenarios. 22
1.3.3 Tools & Test Procedure. 22
1.3.4 Example results. 22
1.4 Call Setup Success Rate (CSSR) & Time. 23
1.4.1 Parameters. 23
1.4.2 Testing Scenarios. 24
1.4.3 Tools & Test Procedure. 25
1.4.4 Example Results. 25
2. SHO Performance. 30
2.1 Parameters. 31
2.2 Tools & Test Procedures. 33
2.3 Testing Scenarios/Example Results. 35
SHO Tuning: CPICH Ec/No Filter Coefficient 35
SHO Tuning: Addition and Drop Time. 36
SHO Tuning: Addition and Drop Windod. 36
SHO Tuning: Maximum Active Window Set Size. 38
3. ps data performance. 40
3.1 Cell Throughput 40
3.1.1 Parameters. 40
3.1.2 Testing Scenarios. 42
3.1.3 Tools & Test Procedure. 43
3.1.4 Example Results. 43
3.2 Dynamic Link Optimisation. 45
3.2.1 Parameters. 47
3.2.2 Testing Scenarios. 48
3.2.3 Tools & Test Procedure. 48
3.2.4 Example Results. 49
4. Inter-system handover 55
4.1 3G to GSM Handover 55
4.1.1 Parameters. 55
4.1.2 Testing Scenarios. 56
4.1.3 Example results. 58
4.2 GSM to 3G handover 59
4.2.1 Parameters. 60
4.2.2 Testing Scenarios. 61
4.3 3G to GSM cell Reselection. 61
4.3.1 Parameters. 61
4.3.2 Testing Scenarios. 61
4.4 GSM to 3G Cell Reselection. 63
4.4.1 Parameters. 63
4.4.2 Testing Scenarios. 65
4.5 Tools & Test Procedure. 67
5. References. 67parameter_testing_reference_quide.zip
Bookmarks