drive test problem

[simmus0300]

Dear,

I have exported 15 log files in tems tool into mapinfo format.How can i make a report that contains the sites name, cell id and distance covered by each cell in these log files .

[justdream]

what's the problem?

[gprastomo]

Dear,

I have exported 15 log files in tems tool into mapinfo format.now can i make a report that contains the sites name, cell id and distance covered by each cell in these log files .

Of course you can do that, simple

[simmus0300]

Of course you can do that, simple
Pl expalin the step by step method, Thanks in advance.

[gprastomo]

Before export the logfile you can choose which parameter you want to show in the map info, eg TA, RxLev, RxQual.
After exporting to mapinfo then open the exported tab file, and create the result using thematic.
For the site information, you can create separately/ view using map info and open them on the same layer.

[simmus0300]

Before export the logfile you can choose which parameter you want to show in the map info, eg TA, RxLev, RxQual.
After exporting to mapinfo then open the exported tab file, and create the result using thematic.
For the site information, you can create separately/ view using map info and open them on the same layer.

Dear,
How can I calculate the distance covered by each site.

[gprastomo]

For 2G you can use TA, and for 3g you can use propagation delay (but i dont think so tems can do this)

[hassen]

Dear,
How can I calculate the distance covered by each site.
hi

if you have e******* equip there is feature called PMR by choosing cell you can see the coverage from sts.

br hassen

[electron]

You can create Thematic by Cell Id after thanatic you can see serving area of each cell by diffrent color

[hassen]

You can create Thematic by Cell Id after thanatic you can see serving area of each cell by diffrent color
hi

you are right but for coverage i mean no just the road but all area indoor and outdoor
you need the feature like pmr to collect data measurement from MSs
because as you know each ms send to bsc measurement report .

br hassen

[electron]

Dear Hassen

According to your replied message and Simmus300 request It's clear he is looking for some thing like Coverage plot!
I thing it's much better to use planning software like ASSET,TCP,...

Any way i think it is not possible to prepare this kind of plot with Map info.


BR//
Reza

[simmus0300]

hi

you are right but for coverage i mean no just the road but all area indoor and outdoor
you need the feature like pmr to collect data measurement from MSs
because as you know each ms send to bsc measurement report .

br hassen

Is PMR is a feature of tems kit or e******* bsc/MSC/BTS ?.
I just want to calulate the distance covered by each cell during drive test in a log file. It may be 100m or 50m or 2km.

[electron]

PMR is a feature of e******* OSS database and platform(RNO package)

[simmus0300]

PMR is a feature of e******* OSS database and platform(RNO package)

I just want to calulate the actual distance covered by each cell during drive test in a log file. It may be 100m or 50m or 500m.Although its actual coverage may be 4 km.

[electron]

try to thematic log files by Cell Id after that you can use ruler to calculate serving area,It's simple solution!!

[simmus0300]

try to thematic log files by Cell Id after that you can use ruler to calculate serving area,It's simple solution!! i want to calculate distance between served area and serving cell.

[rheyra]

Hi simmus0300,
Drivetest will not accomodate area. Drivetest only takes samples from routes, not area, so if you want to know what's the coverage distance of a cell in drivetest, you just take the maximum timing advance of each cell after exporting log files.

BR//Rheyra

i want to calculate distance between served area and serving cell.

[RF engineer]

I think this can be done in TEMS by scanning BCCH and BSIC with CI and then can be tranformed to tab file and get exactly where in the area the specific BCCH and BSIC can be decoded but really i don't know how to do it just i saw once time but i forgot it how to do if some one be so good in mapinfo can tell us.

[corneliu]

Dear,
How can I calculate the distance covered by each site.
You can evaluate the serving area on your plot by measuring the CellId plot , TA will give you only the distance to site.