-
Junior Member
Reputation: 10
Moshell Commands VSWR_Node B
Hi all,
What is the difference between measuring the VSWR using Moshell commands (Cabx) and using the site master ?
Thanks in advance
-
2014-03-27 04:08 PM
# ADS
Circuit advertisement
-
Member
Reputation: 93
Re: Moshell Commands VSWR_Node B
Site master help you to locate the fault (distance to fault) and fix it. Moshell command only shows VSWR measurement.
BR,
Ivan
-
Junior Member
Reputation: 10
Re: Moshell Commands VSWR_Node B
Hi,The VSWR (Return Loss) measure can be taken either with site master or via Moshell commands, I want to know the difference between the two measures.BR
-
1 out of 1 members found this post helpful.
Re: Moshell Commands VSWR_Node B
Hi,
when you get the VSWR value with moshell, you are getting the VSWR for the DL channel frequency configured for that carrier. With site master you can configure the range of freq you want (entire band UL+DL if needed), DTF, and obviously, get captures of it.
Bookmarks